In this video I make a bowl from the first pattern in Carole Rothman's book "Scroll Saw Wooden Bowls". She made hers from aspen but I used inexpensive pine construction material. I wanted this to be a practice or learning project and I did not have any 3/4 inch aspen. It came out better than I expected although I did drill the entry holes incorrectly and left a gouge in two of the rings on the outside. I did it again and drilled the holes with a drill press and did much better but did get one hole off and left a small groove on the inside of the bowl. But, that is why I call these practice bowls. I hope practice makes perfect. But I did follow here procedures and got the hang of the process. The angles lined up almost perfectly and made them easy to sand and finish.
Here are links to the book and the tools that I have purchased.
Link to book:
https://amzn.to/48D0NxB

Flex pad sander and discs:
https://amzn.to/3S7sadV

Sanding sleeves for inflatable sander:
https://amzn.to/4aLRsFo

Inlatable sander:
https://amzn.to/3S3FmQT

Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
https://amzn.to/3LVcYNl

30 60 90 ruler
https://amzn.to/46JFyct

45 45 90 ruler
https://amzn.to/3PStOxq

swivel hooks
https://amzn.to/3Qduf77
https://amzn.to/3FRIAQE


Some of my favorite pattern books

classic fretwork patterns
https://amzn.to/3PT7fsJ

custom boxes
https://amzn.to/3ROJt3B

gear clocks
https://amzn.to/45rXxDl

gizmos and gadgets
https://amzn.to/3FnoBJ5