YouTube magic that brings views, likes and suibscribers
Get Free YouTube Subscribers, Views and Likes

RV Pro Tips: How to replace a kitchen faucet when you want to give your RV a fresh new look

Follow
Keystone RV Company

00:00 Intro
Welcome to another episode of RV Pro Tips. This video walks you through installing a new kitchen faucet in your RV for a fresh look.

00:26 Plumbing
The plumbing in your Keystone RV is similar to what you would find in your home. So whether you buy a direct replacement part or buy something locally, the installation process will be similar.

00:54 The Tools
The tools/equipment needed are:

Replacement faucet (verify it will fit the countertop opening)

Channellock pliers

Basin Wrench

Shop towels

Washer (if needed)

Before starting the project, make certain to review the space requirements needed. Many stories have been told around the campfire just from watching others do this task!

1:09 Turn off the water supply
Let's go ahead and start by turning off the water supply hose or shutting off the water pump. Once the source is turned off, you may go ahead and follow the steps below:

Release the pressure in the water lines by opening up the hot and cold water faucets until no more water is coming out.

Lay down a few shop towels on the floor under the faucet area to capture any residual water that may spill of out the lines.

1:35 Disconnect the water lines
Loosen the supply linesthey should be handtight however you may loosen then with channellock pliers if needed.

2:20 Remove the old faucet
After both hot and cold water lines are removed, loosen the faucet retaining nuts, under the countertop, attached to the base of the faucetthey should be hand tight. If they are snug you may need to use channellock pliers or basin wrench to loosen.

2:48 install the new faucet
After the removal of the old faucetclean the countertop of any debris.

Install the new faucet and hardware following the instructions included in the packaging of the replacement faucet.

4:08 Connect the water lines

4:22 Test for any leaks
Once installedit is now time to test for any leaks.

Turn the water supply back on and check all connections under the sink. If all is dryyou are then ready to run water through both the hot and cold sides and recheck.

You are all set, you changed out your faucet. Well done!

If you have an idea for other RV Pro Tip videos you would like to see, please leave us a comment. Make sure to subscribe to our YouTube channel, or visit at keystonerv.com to see all of our howto content. Thanks for watching!


Just another way Keystone RV helps you Camp Better!

KEEP UP WITH ALL THE LATEST PRODUCTS, INNOVATION & FUN FROM KEYSTONE!

LIKE & SUBSCRIBE TO OUR YOUTUBE CHANNEL

Visit our Website: https://www.keystonerv.com/
Like us on Facebook:   / keystonerv  
Follow us on Instagram:   / keystonervcompany  

#KeystoneRV #rv #campbetter #rvsolar

Always use caution when working on your RV. If you are uncomfortable, stop and schedule an appointment with a Keystone dealer. A professional service technician should work on safetyrelated items. Keystone RV is not responsible for damages or injuries that occur as a result of any of the information contained in this video.

About Keystone RV Company
Keystone RV Company is the #1 manufacturer of towable RVs in North America and employs approximately 5,000 people in north central Indiana. Our company is focused on delivering superior product design, industryleading innovation, builttolast quality, and humancentered customer service. Keystone offers a wide range of awardwinning RVs including singleaxle minis, ultralightweight travel trailers, luxury travel trailers, fifth wheels, and toy haulers. Our brands include Montana, Montana High Country, Cougar, Alpine, Avalanche, Raptor, Carbon, Fuzion, Impact, Sprinter, Outback, Arcadia, Bullet, Passport, Springdale & Hideout.

posted by onduregnorf