Group of companies STiM
Tel./fax: + 375 (162) 508250.
email: [email protected]
Katin Bor, 103, 224025, Brest, Belarus
http://www.stimby.net/
The Shmel 11A road marking machine is designed for airless horizontal road marking using quickdrying paints using retroreflective glass beads.
" Shmel 11A " is the most popular road marking machine in the CIS countries. The machine has a relatively small size and high maneuverability, thanks to which it is perfectly suitable for marking not only for main roads, but also for city streets.
Main technical specifications:
engine (Briggs & Stratton) with maximum power: 23 hp (17 kW);
engine fuel type: AI92;
inlet compressor capacity (Fini): 380 l / min;
conditional performance of the paint pump (Graco): 26 l / min;
application speed of a single solid line (width 15 cm, 800 g / m2): 10.8 km / h;
application speed of a double solid line (width 15 cm, 800 g / m2): 5.5 km / h;
maximum marking speed: 12 km / h;
maximum working paint pressure: 130 bar;
capacity of the capacity for the paint: not more than 600 kg;
capacity of a container for glass beads: no more than 240 kg;
overall dimensions of the machine in working position (length / width / height), no more, m: 7.9 x 2.8 x 2.9;
overall dimensions of the machine in transport position (length / width / height), m: 5.5 x 2.1 x 2.8;
curb weight of the machine: 2660 kg;
gross vehicle weight: 3500 kg.
Basic equipment of the machine:
a marking block on the left side of the machine with two pairs of spray and powder guns (Kamber);
M12 marking control panel with miniconsole; paint flow sensor;
digital speedometer in the driver's cab;
a beamtype beacon on the car cabin, a pointtype beacon on an awning frame at the back of the machine, a stroboscopic beacon on a marking block;
motion sensor glass;
intercom;
“Video marker” system;
sign of the direction of detour obstacles (700 mm) on the swivel bracket;
manual spray gun (extension 40 cm, hose 10 m, Graco);
a manual air gun for cleaning work equipment with air.
Additional options for the road marking machine:
a marking block with one pair of marking and powder guns and an operator's chair on the right side of the machine (Kamber);
an additional pair of spray and powder guns (Kamber);
illumination of the marking block and the operator’s workplace at night;
photosensor of the beginning of the line (with the possibility of installation on any gun);
cluster sign of the obstacle detour direction (1050 x 1050 mm, cluster 200 mm);
system for pumping paint into a container (productivity 50 kg / min);
equipment for the use of paints in two different colors;
hydraulic mixer in the paint tank;
a set of equipment for applying cold spray plastic in a ratio of 98: 2, which includes the presence of a hydraulic mixer in a container with material and one gun per marking unit on the left side of the machine;
a system for repeating road marking of LIS on the right side of the machine with one pair of marking and sprinkling guns;
a pedal duplicating the start button of the marking control panel;
a set of equipment for applying spray plastic 98:2 (one line);
a set of equipment for applying spray plastic 98:2 (two lines).