Custom Knife Making: The Drop Point EDC knife with a hidden pin construction system.

Thank you for joining me on my channel. Today, we will be making a Drop Point EDC knife, using a hidden pin construction system, to not spoil the laser engraved handle scales. I made this knife using 5mm 5160 steel for the blade, 6mm Carbon Fibre tube for the pins and natural Micarta for the scales. Feel free to use whatever you have available or prefer. Don’t forget to like and subscribe.

The Ortur Laser Master 2 Pro review:    • Laser Technology within Knife making:...  

01:30 Cutting the profile
02:00 Cleaning the profile
03:00 Drilling the pin holes
04:00 Scribe the bevel areas
04:20 File the plunge lines
04:45 Grind the bevels
06:20 Heat treat the knife
08:00 Round off the chill
09:00 Grind the Swedge
09:30 Hand sand the profile
10:10 Prep the handle scales
11:00 Dril the pin holes
13:00 Shape the scales
14:26 Laser the makers mark
14:45 Glue up the scales
16:50 Profile the handle

DISCLAIMER:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Zeeman Knives will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including losses, damages, or injuries sustained while you were trying to emulate the actions and projects on this channel).
Always wear the appropriate safety clothing.