I Restore an Old Bench Vice or Vise, as a gift for my Grandson. This is not a full restoration as my main purpose was to clean the vice up so it looked as good as it could and lubricate the vice to make it very easy to wind the vice in and out as it was for my young grandson.
After a bit of time, I managed to get the vice jaws off the screws were very locked in and tight, and I could then see that at some stage in the past two of the bolts must have broken or been damaged, and new holes were drilled next to where the old ones were, the jaws were very old and I decided to make a new set and drill the holes to match the holes in the vice.

This workbench vice is small (2 inches or 50mm) and will only be used as a beginner's vice for my grandson, I feel it will now do that job nicely.

I enjoyed this little project, and my grandson loves his new bench vice, I hope you found something of use in my video or at least found it entertaining.

Tools / Supplies, I often use are.

Marking out Tools
Markal SilverStreak Metal Marker Round: https://amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: https://amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: https://amzn.to/3kHrXfo

Locking Pliers – Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: https://amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: https://amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: https://amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: https://amzn.to/3ByD1SP

Magnets
Magnetic VPads Kit, Magnets On Both Pad Face & Bottom: https://amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: https://amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: https://amzn.to/2YaZXsU

My camera setup.
Canon EOS M6 Mark II Camera 1545mm Lens: https://amzn.to/3DNnn83
VideoMicro Rode Compact OnCamera Microphone: https://amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: https://amzn.to/3yB8hP5

The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: https://alphatools.com.au

As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!

►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.

Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY