We're going to find out if this cart will be faster if we upgrade from a stock motor to a new golf cart motor. I walk you through the removal, unboxing, install, controller upgrades, field map updates, and finally a speed and torque test.

All of the items I upgraded in this video can be found here:
D&D 1705021 Motor: https://amzn.to/3K3Fv2p
48400 Alltrax Controller: https://amzn.to/3PZHk40
2 guage cables: https://amzn.to/2Lv9IIT

0:00 Start
0:16 Heat test and old motor
0:49 Jack up the cart
1:08 Remove rear drivers side wheel
1:20 Remove power at battery
1:37 Remove F1, F2, A1, A2 from the old motor
2:20 Remove 3 of the 7/16 bolts holding the motor in place
3:02 Snip the speed sensor wire
3:12 Remove old motor from the spline
3:33 D&D 1705021 Motor unboxing https://amzn.to/2TaRKQ7
4:39 Try crimping speed sensor wires
4:49 Motor side by side comparison
5:11 Grease the splines
5:18 Install new motor on spline
6:05 Loosely install 7/16" bolts to hold motor in place
6:53 Put A1, A2, F1, and F2 wires back on the new motor
7:50 Wire speed sensor back to the controller
8:14 Install heatshrink tubing and flexloom
8:36 Tighten three bolts holding motor in
8:44 Reinstall rear tire
9:08 Put the battery cable back on you removed earlier
9:35 Drop cart off jack
9:37 First Speed test old field map
10:24 Upgrade Alltrax software
10:34 Alltrax Toolkit demo old motor PDS DCS
11:05 Watching Alltrax guages while I'm running for 4200 RPMs
11:54 Drone shots and final torque test
12:18 First hill run
12:33 Front tire pops off ground
12:42 Does a motor upgrade make the cart faster
13:19 Overhead drone tracking and conclusion

_________________________________________________________________
Subscribe:    / @andiwofford  

Instagram follow me at   / woffoja  

Follow me on Twitter   / woffoja  
__________________________________________________________________