Join the discord:   / discord  

Parts List
From Home Depot: For the Bases
In the Plumbing Section
8 x 2” ABS Cap https://www.homedepot.ca/product/less...
1x 2” ABS Pipe 3 Feet https://www.homedepot.ca/product/ipex...
In the Electrical Section
4 x 1 1/4” Coupling https://www.homedepot.ca/product/carl...
8 x 1” Coupling https://www.homedepot.ca/product/carl...
In the Moulding/Trim Section
2 x 1/2” C Channel 8 feet https://www.homedepot.ca/product/alex...

From Home Depot: For the Tubes
In the Plumbing Section
8 x 3/4” Coupling https://www.homedepot.ca/product/less... (This part is technically for the fixtures)
In the Electrical Section
8 more x 1” Coupling https://www.homedepot.ca/product/carl...
8 x T12 Tube Guard https://www.homedepot.ca/product/lith...
In the Moulding/Trim Section
8 x Flat Bar https://www.homedepot.ca/product/alex...
In the Hardware/Fasteners Section
24 x 1/2” 632 Screws https://www.homedepot.ca/product/paul...
24 x 632 Nuts https://www.homedepot.ca/product/paul...

Disclaimer After checking out some other hardware stores, I found that not all the couplings are made the same. I do recommend sticking to homedepot fore these parts OR if you have to go to a different hardware store, make sure your 3/4” coupler fits snugly, but not too tightly within the 1” coupler. Next make sure the 1” coupler fits fairly loosely inside the 1 and 1/4” coupler. Also, make sure the 1 and 1/4” coupler fits inside some 2” ABS pipe. This doesn’t have to be a perfect fit as you can always accommodate for a looser fit later. Finally, make sure the 2” ABS caps have a flat bottom as the ones in home hardware OR RONA actually had this curved bottom which would make mounting the legs a nightmare.

From Amazon.ca (Disclosure: I receive a small commission from purchases using these links but this does not effect the sale price at all)

For the Bases:
Box of 1/2” 832 Screws https://amzn.to/48dhhw8
Box of 832 Nylon Nuts https://amzn.to/3uPoFzl
Tent Pole Clips https://amzn.to/3v4wRf7
2x 16mm Aviation Socket https://amzn.to/4amdPRG (8 pairs for base and 8 pairs for Distro)
RGB Wire https://amzn.to/3tmHMQT'>https://amzn.to/3tmHMQT
For the Tubes:
Pack of Spade Connectors https://amzn.to/3uX2gjM
Parchment Paper https://amzn.to/3thetiI
LED Strip:
12V SMD 5050 RGB 60 LEDs per Meter https://amzn.to/3GKpdcq
For the Cables:
2 x 100 Foot 164 Cable https://amzn.to/48AC7WH (Cable looks decent but not sure how flexible the casing is)
2 x Heavier Duty 100 Foot 164 Cable https://amzn.to/46UKPh2 (These look closer to the cable I used in my build, though more expensive)
For the Distro:
24 Channel DMX Decoder https://amzn.to/3GOlfjk
12V 360W Power Supply https://amzn.to/3RpXx1E
Power Cable https://amzn.to/3RLdeBR
Power Jack https://amzn.to/4amtQHr
XLR Female Jack https://www.avshop.ca/wireampcable/...
XLR Male Jack https://www.avshop.ca/wireampcable/...

From Amazon.com (Disclosure: I receive a small commission from purchases using these links but this does not effect the sale price at all)

For the Bases:
Box of 1/2” 832 Screws https://amzn.to/3GHmeBC
Box of 832 Nylon Nuts https://amzn.to/3RGSvze
Tent Pole Clips 2 Button https://amzn.to/46WZYi0
Tent Pole Clips 1 Button https://amzn.to/3RGNKFD
2 x 16mm Aviation Socket https://amzn.to/3TliRIf
RGB Wire https://amzn.to/3tmHMQT'>https://amzn.to/3tmHMQT
For the Tubes:
Spade Connectors https://amzn.to/4ao86La
LED Strip:
12V SMD 5050 RGB 60 LEDs per Meter
For the Cables:
2 x 100 Foot 164 Cable https://amzn.to/3tdOxET (Cable looks decent but not sure how flexible the casing is)
2 x Heavier Duty 100 Foot 164 Cable https://amzn.to/3GIqMI9
For the Distro:
24 Channel DMX Decoder https://amzn.to/41r104A
12V 360W Power Supply https://amzn.to/41qFTzf
Power Cable https://amzn.to/48EqvSz
Power Jack https://amzn.to/4aq3xA3
XLR Jacks https://amzn.to/3RKCecl

Voltage Drop Calculator: https://www.rapidtables.com/calc/wire...