DuraVent DVL Stove Pipe is IN STOCK & READY TO SHIP https://bit.ly/3ACeaPT
Check out our Stove Pipe Builder here: https://bit.ly/3BJucXN
You can also shop our Stove Pipe selection and save up to 60% OFF here: https://bit.ly/33NywZw

Want to SAVE even more on your order? SIGN UP for our discount club: https://bit.ly/36ABbH0

Don't forget to LIKE, SUBSCRIBE and SHARE OUR VIDEO which helps us produce more content for our channel, thank you for watching!

Joe shows you how to install DuraTech DVL Double Wall Stove Pipe.

Insert the adapter or Connector section of pipe into the installed ceiling support box. Install it so the seams are in the back. Insert inner sleeve into outer sleeve (if applicable).
Slide Ring over the bottom of the adapter. Screw the Trim Plate to the support box or wall thimble. Slip top piece of DVL pipe over adapter and screw together, you may need to predrill the hole in through the piece of pipe.

Next you will need to install the stove top adapter into the collar on the stove. Place adapter on top of the collar and gently slide down on to the opening with a little pressure, being sure to push down all the way around.

Install the second section of pipe, this will generally be the adjustable piece, on the stove collar or adapter. Note that the bottom of the Pipe Section goes inside the stove collar or appliance adapter. Also, remember to place the seam to the rear of the stove. You can secure the telescoping DVL Pipe with screws via the predrilled holes, when the desired length is reached

Now you can connect the bottom stove pipe to the top stove pipe, slide the adjustable pipe up to see if the stove is in the correct position, you may need to shift it slightly to ensure a plum and level install. Install 3 sheet metal screws at each joint to ensure stability.

You will also want to wipe down the stove pipe to remove any glue or oils from your hands, if the fingerprints are left on the pipe they will be very visible after you use the stove pipe. Also, you may have some light smoking the first couple of times you use your wood burning stove.

DuraTech DVL must be installed with at least an 6" clearance to walls and 8" clearence to ceilings. Read all instructions carefully before starting the installation.

Use only authorized DuraVent DVL parts.
Do not mix with single wall stove pipe.
Do not mix with other products or improvise solutions.
Do not install damaged parts.
All wood burning appliances require their own separate connector pipe and chimney system.
DO NOT ENCLOSE DOUBLEWALL CONNECTOR PIPE or fittings and/or pass
through walls, ceilings, attics or closets.
DVL Pipe cannot be cut..
Consult your local building codes before beginning the installation.

Click Here http://www.northlineexpress.com/stove... to see all of our Wood Stove Pipe

Please remember to like and share this video with friends and family.