To Purchase: https://bit.ly/3Xo9N5t
Find in Catalog: https://bit.ly/428g7iZ
80/20 Website: https://bit.ly/3peM7n3

Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at the locking grabber handle. This handle combines a slam action latch, a handle, and a lock into one convenient unit. It’s easy to install and it’s available in both fractional and metric.

Now the handle does come with all recommended mounting hardware, however, your panel is going to need a machining service in it. More information on 80/20’s machining services can be found in the 80/20 product catalog.

Now when it comes to installing it, you’ll take the locking portion first. Put it into the panel. You’ll take the backing plate, and slide it onto the backside, and we’ll sandwich the panel right in between them. You’ll take your screws and start hand tightening them down. Get that bottom one on there.

From there, you’ll take your Phillips screwdriver, and tighten those down. Now the last thing you’ll want to do is move your strike plate into position. We’ve got ours preloaded into the Tslot already. So we’ll line it up with the latch, we’ll take our wrench, we’ll just tighten that down. Once you have the locked into place, you have a strong secure connection.

Now one other thing you’ll want to note is that there is a lever on the inside so you can open it from either direction. Now hopefully you found this segment on the locking grabber handle helpful. For more information, please visit 80/20.net, and make sure to subscribe for future 80/20 videos. And always, make it a great day.