Install was pretty simple and straight forward.

IMPORTANT NOTE BEFORE YOY INSTALL! READ BELOW!

Since I did use the template, I come to find out, that the drivers sits more flush, and the passenger side has about 1/4 gap. This was due to me incorrectly applying the template. To avoid my mistake do the following below

Updated Fix! (What I did NOT do in the video)

When using the template, each taping point is marked in numerical order.

Apply masking tap in numerical order (ex, 1st tape, 2nd tape, 3rd tape etc)

Align the template so that it doesn’t overlap the hatch line onto the actual body of the car. (Like In my video)

Once again I do apologize for this error and hopefully your spoiler will come out properly installed and centered!

Best,

Bo