Click here http://www.roofbox.co.uk/scripts/rbve... for more details.

WalkyGuard is an innovative headrestmounted universal dog guard and is supplied fully assembled.

Fitting is extremely easy

Position all headrests so that a gap of about 3.5cm is available between the bottom of the headrests and the top of the back seat.

Position the walkyguard on top of the back seat, making sure that the rectangular bar is in contact with the headrest posts.

Now position the holding brackets. The brackets need to be mounted on two headrest posts and can be assembled both facing right or left.

Screw both holding bracket knobs in tightly to secure the walky guard. It doesn’t make any difference which side you attach first as long as you check both sides are tight.

Adjust the walky guard’s height by loosening the plastic screw collars on top of the vertical stems and slide the telescopic top bar as needed. Tighten the collars to fix into place.

Now adjust the horizontal bars by loosening the plastic collars and sliding the inner bar into position, tightening the collars to fix into place.

On some cars with a smaller gap above the rear seats you will need to remove the top bar.

To do this, simply slide the top bar out and remove from the walky guard. Then remove both plastic collars. The fitting process is then exactly the same.

Sometimes its easier to adjust the headrests after you have hooked each clamp into place, then tighten each clamp to secure the walky guard.

These brackets can attach to all types of adjustable head rest posts.

Click here http://www.roofbox.co.uk/dogguards/ to view our full range of dog guards.