In this video I replace the bushings in the Upper Control Arm/Wishbone. I take all the parts off, do some spot welding, then refit and adjust the parts.
Full parts list and torque settings available on my website: https://vwt25.blog/2021/02/14/upperc...
00:00 Introduction
00:19 Parts and approach
02:43 Marking the wishbone position
05:08 Unbolting
05:47 Removing eccentric washers
07:12 Grinding off spot welds
08:19 Hammering out bushings
09:28 Old vs new comparison
11:14 Pressing in the sleeves
12:23 Spot welding
14:54 Applying lube
15:25 Laser cut stainless eccentric washers
16:53 Refitting the wishbone
19:47 Water level measurement
20:33 0° camber with digital gauge
21:36 Wrap up and comments
#vwt25 #vwt3 #vanagon #volkswagen