Here's how to program a Toyota or Lexus wireless remote transmitter and immobilizer key by yourself without any special tools!!!

Key duplication at a dealership can get expensive, as they charge exorbitant amounts to program a new key. It only takes a few mins to program and you can do it yourself at home without Techstream software.

This aftermarket key was purchased from eBay, for about $30. It was then cut at the local Lexus dealership for $20.

There are two stages in programming the key: the first to program it to start the car, and the second to program the wireless remote to unlock the doors and trunk. You must have one master key already programmed to be able to program new keys and remotes.

Programming the car involves inserting the key into the ignition and depressing the pedals, then inserting the new key to be programmed. Insure the key matches the FFC ID of the original key before purchasing a replacement.

The remote programming involves inserting the key in the ignition, opening the driver's door as well as cycling the door locks. If your door lock actuators are worn out, the locks can be manually cycled.

The vehicle demonstrated is a 2000 Lexus GS300. Procedure should be the same for all 19982005 Lexus GS300 GS400 and GS430, and late 90's to early 2000's Toyota Camry, Solara, Avalon, Corolla, Rav4, Matrix, Sienna, Highlander, 4Runner and Sequioa, in addition to Lexus LX470, GX460, RX300, GS300, ES300, IS300 and LS400.



Get your Toyota Chip key here:
https://amzn.to/3959K62 (US)
https://amzn.to/3tDCexi (Canada)


Link to Etsy shop where you can purchase speedkar99's brother's socks, tshirts or hoodies:
https://www.etsy.com/ca/shop/Speedkar

Check out the speedkar99 Facebook page:
  / speedkar9  

Check out the speedkar99 Linkedin page:
  / speedkar99  

Follow speedkar9 on Instagram for behind the scenes coverage:
  / speedkar9  

Subscribe for more videos just like this:
https://www.youtube.com/subscription_...