Times restore another straight razor. These are great projects for restoration. Some of you didn't like that the original handle was not used in my fist 2 restored rusty razors. I wanted to see if I can save the handle on this one. I always think no more razors because I literally spent hours and hours sanding the hardened steel, but I still always seem to do more of these...

More info can be found after the links



Check out my new Instagram:   / odd.tinkering  
Support me on Patreon:   / oddtinkering  

Tools used in this video:
RUST REMOVER: https://www.mc51thebestrustremover.c...
BETTER ROTARY TOOL: https://amzn.to/2WF75I6
DIAMOND SHARPENING PLATE: https://amzn.to/2jM8izt
PRESS FOR ROTARY TOOL: https://amzn.to/2Uiv1Eu
2AXIS TABLE FOR THE PRESS https://amzn.to/2WPkttl
CAR POLISH COMPOUND: https://amzn.to/2l8VHXp
RESIN POLISH: https://amzn.to/2jOg0sW
CHUCK NORRIS’ TOOTHBRUSH: https://amzn.to/2YfXUj2


SOME OF MY OTHER TOOLS:
POWER FILE: https://amzn.to/2URHvPq
CORDLESS DRILL: https://amzn.to/2Wois77
SCORLL SAW: https://amzn.to/31Eblej

MY FILMING GEAR:
MAIN CAMERA: https://amzn.to/2JvtKox
MAIN TRIPOD: https://amzn.to/2OlpYgn
MICROPHONE: https://amzn.to/2I80iDz
VIDEO LIGHTS: https://amzn.to/2FpJDaB
MAIN LENS: https://amzn.to/2Fm8yMk
CINEMATIC LENS: https://amzn.to/2TmNdHH
WIDE ANGLE LENS: https://amzn.to/2U7iJha
GOPRO: https://amzn.to/2U3eqU3



SUBSCRIBE ▶▶▶ https://www.youtube.com/channel/UCf_s...


Restoration playlist▶    • Tool restorations  



As I started disassembling the blade. I had a little trouble because the pin was stuck due to all the rust. I tried to grind down one end of the pin and hammering the pin out, but I didn't dare to hammer very hard as the handle could break and this time I really wanted to use the old handle. Luckily I have the small precision drill. I managed to drill a hole straight in the middle of the pin but the drill also pushed the pin partially out so I didn't have to drill all the way through. Now I was able to take the blade off.

I dropped the blade in rust remover for few hours which got most of the rust off. There was a lot of pitting but nothing unfixable. Razor blade is no this it easily rusts all the way through. While removing the rust I noticed the "backbone" (I think that's what it's called) was detachable. It used to have some sort of plating, I think it was nickel because there was no copper plating underneath. I decided to use my plating system to replate it because I can and it's not very too much work and it really work well. I actually left the squeeze lighter shell wet overnight after plating to see if it would rust but it didn't

After the rust was removed I just sanded the pitting off. Used rough paper until the pitting was gone and then moved to wet sanding and finally I used metal polish compound and wool wheel to give it the final mirror polish look.

For the handle, as mentioned, I wanted to use the old bakelite(?) handle. I washed all the dirt off but it was still very scratched. I figured my best bet are car polish products. I used fist a polishing compound. It is essentially a coarse paste that gives the surface a a fine sanding. For even better results I continued with a resin polish compound which to my understanding gives the handle very thick resin coating which fills tiny scratches.

After both the handle and the blade were finished it was time to attach them. I used a thin brass pin, identical to the original one. Finally it was time to remake the edge. I did it last to keep the razor safer while I was working on it. I taped the backbone to prevent scratching. I used a diamond sanding plate. I also did a it of stropping off camera to get the edge really nice.

Thanks for watching and reading, if you enjoyed my work, consider subscribing, liking and sharing the video. If you didn't hit the dislike button, twice! and leave me some feedback bellow so I can improve.