So I was building a berm at the Cave and while I was digging at a stump, the arm on my Gehl 5625sx finally BROKE... MASSIVELY!

So today we're going to repair that PROPERLY and make sure it never breaks again! We'll also fix a few more things on the skid steer as well as find a MUCH bigger issue, that will lead into the next video on this machine!

Sit back, relax, and enjoy the process of getting this old Gehl back into proper working shape!

~
0:00 Let's Take a Look at the Carnage & Where the Arms Broke
1:56 Flat Tire Removal
2:31 Replacing the Ignition Switch & Fixing Electrical Issues
13:04 Preparing to Repair the Broken Skid Steer Arms
14:45 Removing the Hydraulic Cylinders
19:45 A Little Cleaning
21:20 Removing the Hydraulic Hard Lines
23:17 Looking at the Damage on the Skid Steers Arms
26:22 Preparing the Left Arm for the Repair
30:21 Tacking the Left arm to the Cross Member
33:45 Cutting the Right arm off the Cross Member
37:03 Preparing the Right arm for the Welding Repair
38:43 Aligning the Right arm for Repair
39:33 Welding the Right arm onto the Cross Member
40:52 A Grinder & Paint, Makes Me the Welder I Ain't!
43:15 Checking the Clearance after Welding
44:24 Preparing the Repair for Paint
46:42 Primer & Paint
47:49 Making a New Hydraulic Fluid Sight Glass
55:54 Removing the Painters Tape
57:37 Reinstalling the Hydraulic Lines & Hydraulic Cylinders
59:12 Making a Holder for the Hydraulic Lines
1:04:04 Making sure the Hydraulics Work Properly
1:05:26 Greasing the Machine & Using the Grease Zerk Rejuvenator
1:07:27 Adding Hydraulic Fluid
1:08:14 How WELL Did We Repair it?!?
1:10:04 What ELSE does this Machine NEED?!?
1:12:37 Pressure Washing the Gehl 5625sx
1:15:48 Testing the Repair by USING the Machine
1:18:16 Discovering MAJOR Engine Issues the SHUT us DOWN!

~

If you have any suggestions, questions, or comments, please leave them below!

Thanks for stopping by, I truly appreciate your support!

#MachineRepair #BrokenMachines #SalvageWorkshop