Ballbearing full extension runners are mounted in two stages:
Start by screwmounting the narrow side of the twopart runners to the drawer side profiles, making sure the front end is flush with the front panel.
If no drill holes are provided, mark the points on the inside of the carcase where you want to mount the broad side of the runners. The position of the first screw is always 37 mm behind the front edge, other exact dimensions are determined by the height and length of the drawer.
Now screw the full extension runners to the carcase and then push both sides of the runners into each other until you hear the drawer click into place.
For more information, visit http://www.hettich.com