►Subscribe! https://bit.ly/2m1d1y7

►Tshirts & Hoodies! https://bit.ly/2kABytm

This is part 2 of the micro Tesla turbine mk2 building series. It took way longer than I was expecting, due to the fact that I had to rebuilt the rotor. I run into some issues while making it and the one you see on the video is practically the 4th rotor (and succesful) and each one was taking roughly 45 days to make. The new rotor has 22 total discs (instead of 18 that the original had). The most important thing though (and the reason that I had to remake it) was the spacers between the discs that are held in the 4 supporting tubes, which are way small in diameter thatn the original ones (1.9mm vs 7mm) allowing more airflow between the discs and thus increacing the boundary layer effect. I didn't finish the build on this part because the video is already lenghty and I didn't want to make you lose interest

Support my videos!:   / johnnyq90  

Subscribe to my channel!    / johnnyq90  

Follow me on Vessel and watch my video earlier! https://www.vessel.com/channels/johnn...

Follow me on Google+ https://plus.google.com/u/0/b/1046338...

Follow me on Twitter!   / johnnyq90