Going all out testing the new Auline A45 batteries by flying them all the way to the peak. Let's see how they handle some full on long range fpv. Includes DVR and commentary plus a closer look at the new Auline A45 battery.

Get the new Auline A45 batteries here: https://bit.ly/3MxVeI1

My Long Range FPV frame designs:
Falcon RPM 7.5" Cinematic / Long Range @ AddictiveRC https://bit.ly/Falcon_RPM_AddictiveRC
Falcon RPM 7.5" Cinematic / Long Range @ CNCDrones https://bit.ly/FalconRPM
RAD Liion 7" Long Range https://bit.ly/3MFoCdg
RAD Scout 7" Xtra Long Range http://bit.ly/3kyvPDy
AOS Falcon 7 Cinematic Long Range https://bit.ly/3jUiLUI

Parts list and affiliate links for 6s long range build (great reliability and balance between power and efficiency)
TMotor F7 Pro flight controller https://bit.ly/3xtW1mE
TMotor F55 Pro II ESC (4in1) https://bit.ly/3uITNOF
Motors for 7" props: T Motor F90 2806.5 1300kv https://bit.ly/3M4fjDg
Motors for 7.5" props: TMotor Velox 3008 1500kv https://bit.ly/3QJ8Gcf
Camera Butter ND Filters http://bit.ly/3WZmSQR
7" props for RAD Scout Gemfan 7035 (triblade) https://bit.ly/3vdSzKu'>https://bit.ly/3vdSzKu
7" props for RAD Liion Gemfan 7037 (triblade) https://bit.ly/3rvCz5f
7" props for Falcon 7 Gemfan 7040 (triblades) http://bit.ly/3YaxFrZ
7.5" props for Falcon RPM Gemfan 7535 (triblades) https://bit.ly/3vdSzKu'>https://bit.ly/3vdSzKu
VTX antenna TrueRC Singularity https://bit.ly/3xvXFEg
VTX https://bit.ly/3JHWW5l
Receiver https://bit.ly/3xuMGv8
FPV camera (analog) https://bit.ly/3JL88OT
GPS https://bit.ly/3uJjRci
Receiver antenna https://bit.ly/3jG7o2L

Video Chapters:
00:00 Introduction
00:32 Intro: Gopro footage
03:51 What's in the box?
06:00 Internal resistance
08:00 Weight
11:00 Flight test with high current draw for last few minutes
15:22 My thoughts after testing and mAh capacity
17:12 Long range FPV flight test with DVR & commentary
19:00 Approaching the peak
20:00 Into the ice!
24:40 To the very top
26:00 Diving down a tight gully
29:13 Final thoughts Auline A45 batteries

Consider supporting the channel on Patreon:
https://www.patreon.com/user?u=48131636

Check out my frame design page @ CNCDrones: https://bit.ly/3vvRrD7