Learn how to install a new 12V battery in a Jeep Commander. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!

Tool List: 10mm wrench, 13mm wrench. Socket and extension is recommended.

Click this link to determine which battery your vehicle needs: https://www.autobatteries.com/homepage

This video shows a 2007 Jeep Commander. The video can also provide guidance on model years: 2006, 2007, 2008, 2009, 2010
The battery group sizes H7 (or 94R) is used during all years.

We highly recommend upgrading to the H7AGM for better performance and longer life. You can learn more about AGM here: https://autobatteries.com/batterytec...

The use of a memory saving procedure can keep the memory alive on the vehicle's computer during the battery replacement procedure. If you want to learn more about memory saving, referring to our video here.    • Vehicle Memory Saving  The Battery Shop  

Although this video may provide you with the basic procedures for replacing your battery, we recommend that you check with the vehicle manufacture's step by step procedures found in service/repair manuals for the vehicle you are working on.



Some late model vehicles must have the 12 volt battery registered with the vehicle's Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at    • Battery Registration with a Scan Tool...   &    • Battery Registration & Coding  The B...  

Always wear safety glasses and gloves when working with or near batteries.