Step by Step guide for unclogging drainage pipes that attach to downspouts.

Step 1, do a visual inspection with a borescope camera to determine which drains need attention.
Step 2, detach the drains from the bottom of the downspout.
Step 3, attach and turn on the water hose to fill the buffer tank.
Step 4, Uncoil all of the highpressure line from the reel. and uncoil all of the sewerjetter line. These lines should be placed in "long loops."
Step 5, Place the jetter tip 12 ft. in the first drainage pipe, stand clear of the pipe, then pull the trigger. Be careful not to get sprayed by the reverse jets or hit by flying debris.
Step 6, Feed the line through the pipe. Use a back and fourth tugging motion on the line to clear all blockages.
Step 7, Once the jetter tip daylights, slowly pull the jetter line back through the pipes while maintaining water flow.
Step 8, Feed the jetter through the same pipe in the reverse direction if necessary. Make sure the pipe exit is clear of all blockages and that water can freely flow/exit the pipe.

~~~~~~~~~~~~~
WEBSITE Business sites:
https://DIVCleaningService.com
https://NCChristmasLights.com
~~~~~~~~~~~~~
SOFTWARE I use to run my business: Quoting, Invoicing, Routing, CRM, Time/Expense Tracking, CC Processing, and more
https://share.getjobber.com/mQgdA0J
~~~~~~~~~~~~~
TOOLS Commonly used:
https://ExteriorCleaningTools.com