How to reset the totalizer on the TacticalFlowMeter MAG meter

How to set the Low Flow Cutoff in your MAG Meter from TacticalFlow Meter
The Low FLow Cutoff is generally set to 10% and the meter response time is set to 10 seconds as well. If you notice your meter does not show flow "near zero flow" you may want to change the default to a lower value.

This is handy when the flow is in the very low flow range. The range of the flow meter can be seen in this chart:
https://cdn.shopify.com/s/files/1/157...

Flow meters have a "best practices" to be run at near 63% of full scale to deliver the utmost accuracy. Of course, as you can see from the chart mentioned above, they can run lower.

The circuitry in the meter is working hard to filter out "noise" and the low flow cutoff is one of the major controllers of how aggressive this is along with Response time.


Visit: https://www.tacticalflowmeter.com/col...


Here is how to reset the totalizer as well...
   • How to reset the totalizer on the Tac...  

EXTRA NOTES:
The user password is 03210

Call (831)2448080 for questions
Tactical Flow Meter MAG meter features LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units.

Specifications.

Electrode Material: 316L SS
Wetted Materials Teflon, 304 SS, & 316 SS
Flow Body Material 304 SS
Flow Velocity .01 15 m/s Nominal 0 3 m/s
Accuracy: +/ 0.5% of reading in water.
Repeatability of +/ 0.15% of reading
1/2" to 4" 150# ANSI flange connections, up to 6" available custom.
LCD Display
Temperature:
Gas: 14°F (10°C) to 350°F (180°C)
Ambient: 14°F (10°C) to 140°F (60°C)
Power Requirement: 24 VDC 20 Watts maximum;
Output signals: Modbus RTU, 4–20 mA, and 010 KHz for flow rate indication
Digital communications: Modbus RTU
Proof Pressure 1.6 MPa, 230 PSIG.
Display: Flow rate, Flow rate 0100%, and total flow
Wiring connection to enclosure size: M20 x 1.5
Factory Final QC Test Certificate
Integral Electronics
Electronics Enclosure: IP65

View full spec sheet here.
https://www.tacticalflowmeter.com/col...

Note: Content is owned and generated by Dave Korpi of this YouTube Channel.

Please select LIKE if this video was helpful