Buy Now!
New Axle Shaft & Bearing Kit from 1AAuto.com http://1aau.to/ib/1AAXS00122

This video shows you how to install new rear axle shafts, bearings, & seals from TRQ on your 19982011 Ford Ranger.

This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger

Tools you will need:
• Pry Bar http://1aau.to/oZI/1AXAA00020
• 13mm Socket http://1aau.to/obKo/1AXAA00015
• 19mm Socket http://1aau.to/oarE/1AXAA00043
• 8mm Socket http://1aau.to/obps/1AXAA00017
• Bearing Puller
• Bearing Race and Seal Driver http://1aau.to/oG/1AXAA00038
• Slide Hammer
• 1/2 Inch Impact Gun http://1aau.to/ovV/1AXAA00252
• 1/2 Inch Socket http://1aau.to/obPc/1AXAA00016
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oHi/1AXSS00035
• Gear Oil
• Gloves http://1aau.to/oawU/1AXSS00048
• RTV
• Rust Penetrant
• Safety Glasses
• sanding disc
• Drain Pan
• Floor Jack http://1aau.to/oagF/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/o5b/1AXAA00065
• Magnet Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
• Wire Brush http://1aau.to/ovv/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All doityourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.