Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/59/a8/bumpersandparts

This video shows you how to install a new TRQ bumper cover on your 20112018 Dodge Ram 1500. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This repair was done on a 2016 Ram 1500 Big Horn 5.7L Crew Cab Pickup 4Door 4WD and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa9f/1AXAA00013
• Pocket Screwdriver
• 18mm Wrench
• 10mm Socket http://1aau.to/oaUf/1AXAA00017
• 15mm Socket http://1aau.to/obcq/1AXAA00015
• 18mm Socket
• Trim Tool Set http://1aau.to/o2k/1AXXX00006
• 5/16 Inch Socket
• Ratchet http://1aau.to/obok/1AXAA00016
• Socket Driver
• Gloves http://1aau.to/oIi/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oUu/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oNw/1AXAA00065
• Pick http://1aau.to/oHq/1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Ram 1500 3rd Generation 20112018:    • Ram 1500 3rd Generation 20112018  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All doityourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.