Fleece cut and tie blankets are so simple to make and are really comfortable for use at home or while camping. In this video, Steph shows you how to make a fleece cut and tie blankets from start to finish. Below are invideo links to the different steps of the process. You can find the fleece blanket fabric by the yard at most any fabric store, including WalMart. We recommend buying fabric scissors as it makes the cutting process go much faster. Make your RV living and RV trip more comfortable with this easy DIY project.

If you have any questions, please leave them in the comments below and don't forget to subscribe for S'more RV Fun howto videos!

The bedding mentioned in this video can be found here: https://amzn.to/3hBnmcj

01:00 Step One: Lay one piece of your fleece fabric out in an open area so you can move around it. Place your second layer on top of and make sure you stretch it out so there are no lumps or "bubbles" in the fabric.

02:34 Step Two: I like to cut about an inch off of all the edges so that I am not working with any seams on the fabric.

03:07 Step Three: Start in one corner and cut between two to threeinch strips in the fabric, spacing them between 2 to 4 inches apart. This spacing is completely up to your preference. I like to cut between 10 and 15 strips at a time so I can sit and tie the fleece without moving back and forth.

03:45 Step Four: Tie your fleece strips into a double knot. If you want to have reversed fray on each side, make sure you are pulling the lower fabric around your while you are knotting (you can see this technique in our How to Make a Fleece Cut and Tie Blanket)

04:57 Step Five: As you round the corners, work a foot or two ahead and then you will notice the blanket starts to bunch up, for this part you have to stretch and pull the last are tied. You will hear what sounds like a ripping noise, but do not worry this is normal! You will repeat this on all the corners. You should also have a long strip on each corner, you can cut this piece off.