In this stepbystep tutorial, learn how to assemble your own custom 4S 14V 5.8A lithiumion battery pack. Whether you're powering an RC vehicle, a portable electronic device, or any other project requiring a reliable power source, this guide will walk you through the process.

Materials Needed:

8 lithiumion battery cells (3.7V each)
Battery holder or spot welder
Nickel strips
BMS (Battery Management System) suitable for a 4S configuration
Soldering iron and solder
Insulating tape
Heat shrink tubing
Wire cutter/stripper
Multimeter (for testing)

Steps:

Prepare Your Workspace: Ensure you have a clean, welllit workspace with all necessary tools and materials within reach. Safety goggles and gloves are recommended.

Select Battery Cells: Choose highquality lithiumion cells with matching capacities and voltages. Make sure they're rated for the desired voltage and current output.

Arrange Cells: Organize the cells into a 4S (4series) configuration. This means connecting four cells in series, positive to negative, to achieve a total voltage of 14.8V (3.7V x 4).

Connect Cells: Use nickel strips to connect the positive terminal of one cell to the negative terminal of the next. Ensure connections are secure and free from any short circuits. A spot welder is ideal for this step, but soldering can also be used carefully.

Install BMS: Connect the BMS to the battery pack according to the manufacturer's instructions. The BMS will manage charging, discharging, and balancing of the cells, ensuring their safety and longevity.

Insulate Connections: Cover all exposed connections with insulating tape to prevent accidental short circuits. Trim any excess material to ensure a neat finish.

Test Voltage and Current: Use a multimeter to verify the voltage across the battery terminals. It should read approximately 14V. Test the current output capability of the pack to ensure it meets your requirements.

Enclose in Heat Shrink Tubing: Carefully slide heat shrink tubing over the entire battery pack, ensuring all connections are covered. Use a heat gun to shrink the tubing evenly, providing additional protection and a professional appearance.

Final Inspection: Conduct a thorough visual inspection of the assembled battery pack, checking for any signs of damage or exposed connections. Ensure all components are securely fastened and insulated.

Safety Precautions: Always handle lithiumion batteries with care and respect. Avoid overcharging, overdischarging, or exposing the pack to excessive heat or moisture. Follow all safety guidelines provided by the manufacturer.

Once your 4S 14V 5.8A lithiumion battery pack is assembled and tested, it's ready to power your projects reliably and efficiently. Remember to exercise caution and proper safety measures when working with highvoltage electrical components. If you found this tutorial helpful, don't forget to like, share, and subscribe for more DIY electronics projects!

Share, Support, Subscribe!!!
Subscribe: https://goo.gl/WfYhoR
Youtube:    / easytechzone  
Twitter:   / easytechzone  
Facebook:   / easytechzones  
Instagram:   / easytechzones  
Google Plus: https://plus.google.com/b/10610497788...

Cover songs collected from NCS youtube channel:    / nocopyrightsounds