This CNC router tutorial video teaches you how to know when you need to change the bit in your CNC router during a project run. When you design a project that has more than one router bit, such as a vbit and a down cutting endmill bit, you need to know what steps are needed and how the postprocessor is set up to make sure the bit change takes place.

In this tutorial, we use the Longmill CNC router, gsender (g sender) control software and Vectric Vcarve, with an acrylic project with an LED lighted base, using an o flute bit and an engraving bit.

Please take the survey of how I am doing → https://bit.ly/3fLNmBY

Download PDF of all videos on this channel (sorted for the beginner) → https://bit.ly/3mLHGfI

LONGMILL CNC ROUTER
Longmill CNC Router → https://sienci.com/product/longmillm...
Longmill touch probe → https://sienci.com/product/touchplat...
gSender control software → https://sienci.com/gsender/?ref=IDCWO...

VECTRIC DESIGN SOFTWARE
Vectrc Vcarve Pro design software (recommended) → https://bit.ly/3d4WrEU
Vectrc Vcarve Desktop design software → https://bit.ly/3D4CwjH

CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnclp2free...

ITEMS DISCUSSED IN THIS VIDEO
Widget Works diamond engraving bit → SEE BELOW
1/8" 0flute bit → SEE BELOW
Make your own clamps design file →
LED & Acrylic set (12 sets) → https://amzn.to/3rXqXYb
LED base (set of 6) → https://amzn.to/35wSJ6j
LED base (set of 4 w/ acrylic) → https://amzn.to/3IKINo8
1/4" Acrylic sheets (set of 3) → https://amzn.to/3rXqRQj
3/16" Acrylic sheet → https://amzn.to/3H9bYAR
1/8" Acrylic sheets 12x16 (set of 2) → https://amzn.to/3AFH5RS

RECOMMENDED VIDEOS DISCUSSED
Make your own clamps video →    • How To Make Clamps For Your CNC Route...  
House number sign project →    • An Easy CNC Router Project You Can Ma...  
How to find exact XYZ position →    • How To Setup The CNC Router Bit Witho...  

BITS LINKS, FEEDS & SPEEDS FOR 0FLUTE AND ENGRAVER

1/4"1/8" reducing collet → https://bit.ly/3IGljAs

1/8"0flute bit
Get it here → https://bit.ly/3syfTCA
* Pass depth (depth per cut): 0.125
* Feed: 6080ipm
* Plunge: 40ipm
* Stepover: 40%

DIAMOND ENGRAVING BIT (Widget Works)
With 120° tip (with 1/4" shank) → https://bit.ly/3tRy98s'>https://bit.ly/3tRy98s
With 120° tip (with 1/2" shank) → https://bit.ly/3qq5KUR
90° replacement tip → https://bit.ly/3bp0omD
* Pass depth (depth per cut): 0.1
* Feed (acrylic): 40ipm
* Plunge: 40ipm
* Stepover: 40% (does not matter with this bit)
→ Set as engraving bit for machines with spindles
→ For glass, steel, granite and other hard materials, contact Widget Works
→ Do not turn router on for this bit

#cnc #cncrouters #cncforbeginners #vcarvetutorials #vectric #cncrouterbits

Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettf...
____________________________________
ROUTER BITS FOR CNC ROUTERS
→ 8pc carbide CNC router bit set (w/ free vector files) https://bit.ly/3d1iQnF
→ 1” Surfacing bit required for surfacing your spoil board: https://bit.ly/2QEYLKz
***Use this discount code (SURFACING BIT)
→ Glass engraving drag bit: https://bit.ly/3tRy98s'>https://bit.ly/3tRy98s

OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
___________________________

Unique PNG's and SVG's and other designs for you to create
Vexels → https://www.vexels.com/?ref=idcwoodcraft
_____________________________
MAKING MONEY WITH A CNC
Words are the topselling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnclp1/
Join CNC ENTREPRENEURS Facebook group:   / cncentrepreneurs  


NEW TO CNC OR STUCK IN A PROJECT?
Schedule oneonone time with me: https://idcwoodcraft.com/forbeginners/

PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi

If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh

CNC FOR BEGINNERS PODCAST: https://anchor.fm/cncforbeginners

Garrett Fromme
Email: [email protected]