How to Install LED Strip Lights (No Soldering)

In this stepbystep LED strip light installation video, we will show you how to complete an LED strip light installation in 5 steps with all the tips and tricks.

If you want to achieve the best results we recommend using only highquality components. Do it right and do it once with Flexfire LEDs. We take pride in our firstclass customer service and in our flawless product design quality. From the Netflix headquarters to movie sets; from 5star hotel rooms to the international space station; from your office to your very own home our strips have been installed just about everywhere you could imagine.

Follow the steps and achieve a professional and clean result exactly how you envisioned it.

00:00 Introduction to LED Strip Lights
LED strip lights are flexible, versatile, and can provide subtle to bright light. They come in different outputs like static white, dynamic tunable white, RGB, RGB + White, and RGB + Tunable White. We will guide you throughout the process from product selection through the installation until you achieve your desired look. Contact us for a free project design.

1:22 Component Check
Make sure that you have all the components needed for your project and that everything is compatible before connecting, cutting, or making any permanent product changes. You will need an LED strip light, an AC/DC power supply, a dimmer or controller, (optional) solderless connectors, a mounting channel (optional but recommended), pliers, scissors, a wire stripper, and a small screwdriver.

4:30 Step 1 Do a Mock Installation
Roll out your LED strip light and inspect for any defects. Repeat this process with the other components. Connect your LEDs to your dimmer and power supply and make sure everything works. Be careful and confirm the polarity is matched correctly through the setup. Always start from the indicators in the solder pads and make sure that every wire going out of the strip light goes into the associated indicator in the controller. Turn the power “on”. Using your controller, go through all of the colors and verify that the color you select in your controller matches the output. If not, you might have some wires crossed.

7:30 Step 2 Measure and Cut
If you need to cut your LED strip light, measure the length needed and only cut along the indicated cut marks with sharp scissors. Follow the installation guide that comes with your reel and the specific instructions.

8:40 Step 3 Attach Solderless Connectors
Make sure the polarity matches throughout the setup and all wires coming out from the strip go to their associated marking on the controller, regardless of the wire color.
Remove 1/2" of the tape cover and adhesive backing, inserting the LED strip light in the connector facing upwards (towards the translucent top). Use pliers to close until you hear a click.

10:20 Step 4 Connect Controller and Power Supply
Connect everything as shown in the previous steps and turn on the power. Everything should be working correctly, and you should see the colors that you select on your controller.

11:24 Step 5 Attach to Mounting Channel or Surface
Clean the nonporous surface where the strip is going to be attached. If you are using an aluminum channel, mount the channel first following the channel's installation instructions. Pull off the backing of the adhesive 2 inches at a time as you stick and press every segment to the desired surface whether it is a wall, or inside the mounting channel. Finally, put the channel's cover in place, start at one end and press it onto the other.

Products featured in this video:
RGB + Dynamic Tunable White LED Strip Light: https://bit.ly/3M8I5Uv
Plugin Power Supply: https://bit.ly/3SOLlXh
Solderless Grip Connectors: https://bit.ly/3dXWfeH
Leona Pro Smart Home Controller: https://bit.ly/3yyvlBd
Mounting Channel: https://bit.ly/3rqCFe3

Resources and helpful Tools:
Inspiration Project lookbook: https://bit.ly/3SyN8jr
Flexfire LEDs Catalog: https://bit.ly/3EdhiEO
LED strip product selector tool: https://bit.ly/3C0PAYV
Leona Smart System landing page: https://bit.ly/3SxteW6
Top 4 considerations before buying LED strip lights: https://bit.ly/3SJzmug