We show you how to build an easy DIY retaining wall.

Have you seen the retaining wall Adam Woodhams built in the July issue of Handyman Magazine?

In this video, Adam explains how to build a retaining wall using timber sleepers to make a sloping yard much more accessible and useable.

Retaining walls can also be an excellent design addition and problem solver.

Use them to add terraces or levels, make paths and create more planting opportunities if your soil is shallow.

By reducing the slope, they also slow water flow, giving it more chance to soak in and making your garden more selfwatering and sustainable.

The range of materials for retaining walls varies from natural stone and purposedesigned masonry blocks to bricks and treated pine sleepers.

What you need:

This sloping garden had no proper entry, so two low walls were built to level off the area and form a walkway, and steps were added.

Treated pine sleepers are the easy and economical option to build a nonstructural retaining wall.

To make one section of wall that is 3m long x 400mm high, you’ll need two 200 x 50mm x 3m sleepers and at least one 200 x 75mm x 2.4m sleeper. Use 50mm thick sleepers for the wall rails and 75mm sleepers for the post

Install Drainage:

Lay slotted Reln StretchDrain behind a retaining wall and pull it out to the required length. Make sure it falls slightly in the desired direction.

Cap the starting end and connect the output end to unslotted pipe, then run to stormwater or another section of slotted drain shallowly buried in the garden as a watering pipe.

Cover to 50mm deep with blue metal aggregate, add filter or drainage fabric, then backfill behind the wall with soil.

Find out about Stretch Drain: http://ow.ly/PjiMH

Visit the Handyman website: http://www.handyman.net.au/howbuild...

Subscribe for more great DIY ideas, projects and tips!