Feel free to change any of the parts, tools, and methods used in this film. Be creative! There is no right or wrong way to build a lightsaber!

GRIP TEMPLATE can be found here: https://goo.gl/8omeip

Lightsaber parts list:
12” x 1 & ½ inch sink tailpiece pipe ~$10 http://low.es/2hhmVZ1
2 feet of 1 & ½ inch PVC pipe ~$3 http://low.es/2i6klCd
1 inch knock out seal ~40cents http://low.es/2igFDjG
24 inch cable ties ~$7 http://low.es/2hMyiaw
1 x small Dring ~$3 http://low.es/2ikFfN7
1 x #1024 1 & ½ inch Oval Phillips Machine Screw ~$2
1 x #10 finishing washer ~$2 http://low.es/2i6xCL0
1 x #1024 rubber well nut ~$2 http://low.es/2igAfNF
box of 3mm rivets ~$5 http://low.es/2hNxlPA
10 feet of 1/2 inc PVC pipe ~$2
Adaptec SCSI card (optional) http://amzn.to/2agsgMF
Oring at the bottom of the hilt (optional) http://amzn.to/1XBWrLm

Building materials used:
epoxy
epoxy putty
bondo filler (optional)
gray primer spray paint
various grades of sandpaper ranging from 100 to 2000 grit (finer grits can be found at auto parts stores)
emery paper (optional)
clear gloss coat (spray or brush on acrylic)
any color “metallic” spray paint of your choice

Tools used:
cordless drill http://amzn.to/1NJC7Sw
miter box with backsaw http://amzn.to/201gIva
hacksaw with 24TPI blade
sanding block
various drill bits ranging from 5/64” through ⅜” http://amzn.to/201gQux
riveter http://amzn.to/1PqQgJM
airbrush (optional) http://amzn.to/201gRyt

Music used in this film:
"Ozymandias" by "Lyvo" is licensed under a Creative Commons Licence.
http://bit.ly/OzymandiasLyvo
   • Video