This video is for those of you who have already purchased, or are considering purchasing my intake blocks and want to get an idea of how the process will go when its time to install them on your GM Inline 6 engine. These blocks can be added to just about any aluminum intake manifold and installed on a 194, 230, 250 or 292 engine.

00:00 Intro.
00:55 Cheat Sheet.
01:41 Headers Modification.
04:28 Studs.
07:14 Header Installation.
09:37 Intake Spacer Variations and PreInstall
10:40 Pro Tip! Using the intake spacers to port the opening of the intake opening on your head.
11:53 Measure twice, Weld Once! Preinstall Fuel Rail to Ensure Everything Aligns correctly.
12:54 MPFI and Carb: Preparing Your Intake to Be Welded to Your Intake Spacers.
15:56 Customization Ideas. Extra Detail.
17:06 It's Time to Weld!
17:47 Setting up at the Machine Shop.
21:18 Pro Tip! How to Properly Center Your Intake Spacers on the Studs.
24:01 Welding the Center Intake Spacer to the Intake Manifold.
28:18 Center Intake Spacer is Welded in Place!
28:51 Removal of the Remaining Mounting Tab from the Intake Manifold.
30:39 Setting up to Weld the Front and Rear Intake Spacers.
31:55 Removal of Intake From Head to Inspect Alignment before Final Welding.
32:25 Welding Complete! Final Inspection.
33:38 A Close Look at Final Details Required to Complete the Intake.
37:03 Intake Matched to Intake Spacers!
37:23 Pro Tip! PreInstalling Fuel Rail Hold Down In Center Position of Intake Before Final Installation on Engine.
38:45 Space Constraints? Size Comparison Between Clifford and AussieSpeed Intake.
40:21 Final Details. Don't Forget to Check Your Accessory Mounts!
41:43 How To Get A Hold of Me.