In this video I will show you a time lapse build of the Flite Test FT Edge 540. The build follows the Flite Test build video and design. Nevertheless I made some modifications which are highlighted during the video.

Link to my STL files: https://drive.google.com/file/d/1aqik...
Link to the plan of my additional plywood spars: https://drive.google.com/file/d/1NFoh...

Link to the 3D printed wing tips on thingiverse: https://www.thingiverse.com/thing:299...

Link to Flite Test: https://www.flitetest.com/articles/ft...

Specs:
After trying different motors and props I finally found a setup that fits perfectly for me.

Motor: TMotor AT2321 1250kv
Prop: Aeronaut CAMCarbon LightProp 9x5
Battery: SLS Quantum 4S 2450mAh
ESC: Graupner BRUSHLESS CONTROL + T 60
Receiver: Graupner GR12 HoTT, 6 chanel
Servos: Graupner DES 281 BB MG for elevator and rudder, EMAX ES09MD for ailerons
Paint: Dupli Color Platinum Traffic Orange (719813), Black (720956), Dupli Color Plastic Primer (557163) (for improving the adhesion on the package tape)

Weight: 1080g (AUW) incl. paint
Average flight time: approx. 6:15 min.


Cameras:
Sony HDRCX730
GoPro Hero 4 Black

Microphone:
Rode NTUSB