Printhead Cleaning Kit (CLICK HERE TO BUY!): https://geni.us/wArXsZT

T664 Refill Ink Bottle kit: https://geni.us/XPNUAz
Electronics Screwdriver: https://amzn.to/2XEmcSZ

WARNING: POWER CLEANING MUST BE PERFORMED AFTER PRINTHEAD CLEANING. Please refer to the Power Cleaning Instructions at the bottom of this page.

Website: http://bestprinterstech.com


Step 1. Print a nozzle Check.
Step 1a. Do not proceed with cleaning unless printer ink is full. Not having full ink may cause damage to the printhead.
Step 2: Unplug Printer
In order for the printhead to be out of place and be worked on. You must unplug the printer while it is printing. This will not cause damage to the printer if done less than a few times.
Step 3.Unscrew Printhead Cover.
Step 4: Place paper towel under the
printhead.
Step 5: Pull out vein of color you are having issues with.
Step 6: Place Syringe tubing over printer nozzel and apply pressure to push cleaning solution through.
Bonus Step: Using the empty syring suck
in some of the ink and push it back in to
add additional pressure to the ink
compartment.
Step 7: Remove syringe tubbing.
Step 8 : Reattach printer vein.
Step 9: Remove paper towel.
Step 10: Place printhead cover back on.
Step 11. Turn printer on and attempt to print a nozzle Check Report.
Step 12. Print color pictures until all color come back to normal.
Step 13. Repeat process if necessary.

The reason the eco tank models are more prone to print quality issues is due to the marketing from

Epson that the ink will last for 2 years. This means people think they dont have to check or buy ink
for 2 years. Except when you print more than 150 pages per month and now your ink is empty and damaging your printhead by running it with low ink. This is what causes the damage. Do not allow your ink levels to get too low.



Power Cleaning INSTRUCTIONS:

You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.

Turn off the product.

Visually check the ink levels and make sure each ink tank is at least onethird full.

Caution:

If you run a Power Cleaning when the ink levels are low, you may damage the product.

Press and hold the power button and the help button at the same time until you see the Power Cleaning screen.

Follow the instructions on the LCD screen to run the Power Cleaning.
When the Power Cleaning is finished, run a nozzle check.

If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.

If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.

Epson.com
https://epson.com/faq/SPT_C11CG22203~...

Video Instructions:    • Epson Eco Tank  POWER CLEANING REQUI...  


Disclaimer

Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.

Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.

All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!

® 2024 Best Printers LLC.