How I fixed a intermittent ABS and break light problem by Rebuilding the EBCM Module. Total cost $1.19 .
This is how I fixed my intermittent ABS and Brake dash lights on my Chevrolet blazer with the KelseyHayes EBCM module, without spending up to 1500 bucks on a new EBCM. You may have code C0265 "Electronic Brake Control Module Motor Relay Circuit." The fault is usually due to broken solder joints on the circuit board. This time I need to pull the EBCM and repair the solder. Its a really simple fix. Just touch the soldering Iron to the bad solder points. This video is kind of long but it goes step by step with little editing.
On a on a 2001 chevy blazer I needed a T10 and a T8 torx tool, That and a soldering iron and some RTV sealant and about 1 hour I was good to go.