Want an easy way to color fill your laser engraved wood using craft acrylic paints like a pro? Unlock the secrets of flawless color fills in wood engravings NOW! In this video I will take you through the process of turning 1/2" cherry lumber into a stunning charcuterie serving set with matching coasters using a laser engraver and inexpensive craft acrylic paint (tips on why the cheaper paint actually work better). Learn how to properly prep your wood to eliminate paint color bleeding into the surrounding grains and get your colors in the pesky wide areas of the engraving. Add multiple colors and painted details. Then finish with a food contact safe epoxy that is BPA and VOC free. Find a PPE, material list and tools with links to my favorite products below.

New to epoxy resin work? Not to worry, I will put a link to some tutorials that will get you going including one to fix any pesky bubbles you might have below.

Want to learn more? Subscribe to our FREE newsletter on our website for a free resin project tutorial at https://jobemacstudios.net/newsletter1'>https://jobemacstudios.net/newsletter1
Get access to all our FREE tutorials, projects and resources for laser, cnc, woodworking and resin pouring.
Have more questions? Feel free to comment below.

Don't forget to give us a thumbs up and subscribe to our channel so you never miss more helpful tutorials like this one. Your support is greatly appreciated.

YOU MIGHT ALSO LIKE THESE TUTORIALS ~

How to Mix Resin ~    • Beginners Resin 101: Mixing Resin #re...  

How to Remove Surface Bubbles from Resin ~    • How To Remove Air Bubbles From Epoxy ...  

What Wood Finish Should I Use For Charcuterie Boards ~
   • What Wood Finish Should I Use For Cha...  

FIND ME HERE: ~ Website: https://jobemacstudios.net/
Instagram:   / 1elephantmemories  
Facebook:   / 1elephantmemories  
TikTok:   / elephantmemories  

Materials:
Links marked with * are affiliation links with products that I love and use all the time.

Hard Wood with tight grains like maple, cherry or walnut
Inexpensive Acrylic Craft Paints (for a specific reason)
Shellac Wood Sealer
* Epoxy Resin (We used Tabletop Epoxy from Totalboat)
Use this link to order from Totalboat
https://www.totalboat.com/elephantmem...
* Wood hydrator and conditioner (we use Bumblechute Wood Serum and All in One Wood Conditioner)
Use this link to order of wood conditioning products https://www.bumblechutes.com/?ref=1el...
assorted small artists brushes
paper towels (ripped in small pieces)
Sandpaper (180 and 220 grit)
Quality Painters tape (I used 2" wide Scotts Sharp Lines Blue Tape)
Small silicon brush or plastic scraper
Silicone Mixing Cups
Silicone Spreading Brush

PPE (Personal Protective Equipment)
Respirator rated for chemical fumes
Nitrile gloves
Eye goggles
Dust mask
Hearing protection

Tools:
Laser engraver
Bandsaw (to cut out your board and coasters)
Belt Sander (optional)
Hand Sander
Air Compresser with nozzle
Butane Torch
Heat Gun
Utility Knife
Plastic Risers (I just use tops to my Stoks iced coffee)
Bubble level

Disclaimer & Copyright ~ Unless explicitly stated, this not a sponsored video. All opinions are honest and my own.

#colorfill #laserengraving #wood