Why choose DRYLOK? In a recent attitude, awareness and usage study DRYLOK was the #1 brand among consumer awareness. In fact, DRYLOK was the first mention with both PROs and DIY customers.
The top three items that make consumer pick the DRYLOK brand are Product Quality, Excellent Reputation, Recommended by Friends and Family.
DRYLOK Masonry Waterproofer comes in 3 formulas • DRYLOK Original Latex Masonry Waterproofer • DRYLOK Extreme Masonry Waterproofer • DRYLOK Floor & Wall
All are effective in stopping water. DRYLOK works by entering the pores of the masonry, expands as it dries to become part of the wall.
DRYLOK Original stops ten psi or pounds of hydrostatic pressure, equivalent to a wall of water 22 ft. High. It has a textured finish due to the sand fillers, and we call this the workhorse of all formulas.
DRYLOK Extreme comes with a 15year warranty and holds back 15 psi. It delivers a bright white, smooth finish, that can be tinted to multiple colors. Another feature that Extreme has over Original is the incorporation of a Green biocide to prevent the growth of mildew on the dry paint film.
Last but not least, DRYLOK Floor and Wall is a clear waterproof coating with a 7year warranty and holds back 4 psi. Because DRYLOK Floor and Wall can be used on a concrete floor as a prime coat prior to installing flooring or as a finish coat. It is the has the perfect psi for floor application to help prevent cracks from water pressure.
Here are some questions customers have been asking Can DRYLOK be painted over? Yes – with a good quality latex paint
Can DRYLOK be applied to fresh concrete? It is recommended that you let the concrete cure for 25 to 30 days before applying any DRYLOK Masonry Waterproofer.
Can DRYLOK be sprayed? All formulas except the DRYLOK Original can be sprayed with a professionalgrade sprayer. All can be brushed or rolled.
What is the difference between a waterproofer and a water sealer? Water sealers do not stop Hydro static pressure they merely repel water from penetrating the surface of the masonry.
The last question is, will DRYLOK cause structural damage because it traps water in the wall? The answer is no – DRYLOK has a permeability rating, which determines how much moisture can pass through. Moisture as in vapor, not water droplets.
Some other particular uses for DRYLOK are swimming pools, birdbaths, retaining walls, and much more. Visit DRYLOK.com for using the right product for the right job.
As we all know, the proper prep will lead to the most success. DRYLOK Masonry Waterproofing is three steps Prepare – Patch – Waterproof
First, we recommend that you clean the surface with a wire brush to get all loose particles, dirt, and dust removed from the surface. If you see a white powdery substance, this is natural salts present in the masonry and is the biggest enemy of any waterproofing job. It is called effloresces, and you want to neutralize these with DRYLOK Etch or muriatic acid.
DRYLOK Etch is much safer than muriatic acid and comes in powdered formula.
Next, any cracks present in the masonry must be patched, if not they will be a gateway for water to enter. It is especially important to fill the floor wall joint, where the floor meets the wall as this is an area with the most water pressure and the most susceptible to leaking. All this can be done with DRYLOK fast plug, which is a fastsetting hydraulic cement that sets in 3 to 5 minutes. DRYLOK Fast Plug is a powder that is mixed with water. The colder the water, the slower the product sets.
Now you are ready to waterproof. No matter what formula you choose they are all independently tested, guaranteed to stop water and come with a strong brand reputation that your customers know and trust.