Howto install Victron Venus OS on Raspberry PI w/Touchscreen to create a DIY Cebo GX

Affiliate Links:
5" Touch Screen: https://amzn.to/3GPDXql
Another 5" Touch Screen that works: https://amzn.to/3nXEZeb
VE.Direct to USB Cable: https://amzn.to/3ZMY6py

Some links to Raspberry PI boards
This is a RP4, I used a RP3 B+ but the RP4 should work if you download the RP4 image
https://store.rakwireless.com/product...

Instructions:

Download: https://updates.victronenergy.com/fee...
Or newer version if available
Download this instead if you have RasPi 4: http://updates.victronenergy.com/feed...

Use BalenaEtcher to write the downloaded image to SD Card

Install SD Card in Raspberry PI power up, and find with VictronConnect app

Set IP, or WIFI through VictronConnect app

Access REMOTE CONSOLE from victron app

Go to Settings, General and highlight Access level Then click, and hold the right arrow hotkey for 5 seconds.

Set root password, and enable SSH on LAN

Use Putty to SSH to IP assigned to Venus device

Enable GUI on touch screen
mv /etc/venus/headless /etc/venus/headless.off

reboot

================
CONTACT: [email protected]
Business/Collaboration only. Please do not contact me for for personal project help, or advice.
================
DISCLAIMER: These videos are documenting my own projects, and experiences. These projects, and activities can be dangerous. Do not try any of this at home, doing so will be at your own risk.