This episode I go over how to replace your control stalk bushings, steering cams, and set creep on your bobcat with nothing more than simple hand tools in order to save you $1200.00

Bushings and cams: https://amzn.to/3kfsGYT
Control stalk rubber boots at bottom: https://amzn.to/41cmPEG
Handle bar grips: https://amzn.to/3Z521Nw
Replacement seat: https://amzn.to/3IcMq7E
Cab Bushings to body: https://amzn.to/3YIGKt4

This is the part number for the plastic spacers that I lube in the video I reused mine but if yours are worn out or broken the revised ones are black this is the part number 6558436
https://amzn.to/4139M8A

Note: Older hand control brackets have a straight slot and use two spacers (6558680) and one guide (6558436). New brackets have a keyhole slot and use two guides (6558436). Check the slot before ordering.

Replacing the control bushings on a Bobcat 743 skid steer loader involves the following steps:

Follow along with these steps:
1⃣ Gather tools and materials: You will need a few basic tools to complete this task, including a jack, jack stands, a hammer, a punch, a pair of pliers, a torque wrench, and a set of sockets. You will also need a new set of control bushings.

2⃣ Raise the skid steer: First, use the jack to lift the skid steer off the ground until the wheels are clear. Place the jack stands under the skid steer to support it while you work.

3⃣ Remove the control levers: Next, remove the control levers by removing the bolts that hold them in place. You may need to use the pliers to help remove any stuck bolts.

4⃣ Remove the control bushings: Once the control levers are removed, you will be able to access the control bushings. Use the sockets to remove the bolts that hold the bushings in place, and then carefully remove the old bushings.

5⃣ Install the new bushings: Once the old bushings are removed, you can install the new ones in their place. Make sure to torque the bolts to the correct specification using the torque wrench.

6⃣ Reassemble the control levers: Once the new bushings are in place, you can reassemble the control levers by reversing the steps you took to remove them. Be sure to tighten the bolts to the correct specification.

7⃣ Install the steering wheel: Finally, you can install the steering wheel by reversing the steps you took to remove it. Make sure the steering wheel is properly aligned and tightened to the correct specification.

Save Money on Fuel:
* No gimmicks, no fees, and no subscriptions! https://upside.app.link/6ZRG8

⚠ DIY Liability Disclaimer:
This video is for informational and educational purposes. Always consult with a professional before any DIY project. By watching, you assume all risks and release the creator from liability.
By watching this video, you assume all risks associated with any DIY project and agree to
release and hold harmless the video creator and any associates from any and all liability.
We strongly recommend that you take appropriate safety precautions and familiarize yourself
with any tools or equipment you plan to use before beginning a project. Remember to always
wear protective gear and use caution when working with power tools or other dangerous equipment. We hope you find this video helpful, but please use your own judgment and caution when attempting any project shown in this video. Happy DIYing!


Connect on Socials:
* Instagram ►   / dr.sidewayz  
* Twitter ►   / drsidewayz  
* My Channel ►    / drsidewayz  
* Kit List ► https://kit.co/Dr.SidewayZ
* Link Tree ► https://linktr.ee/Drsidewayz

Get ready to tackle equipment maintenance with confidence! Subscribe for more DIY tips and tricks.
#Bobcat #Bobcat743 #SkidSteerTutorial