This is build episode #2 of our build series!
Join us as we install our subflooring, install our MaxxAir fan by cutting a hole in our roof, and install our final ceiling material.
Linktree
https://linktr.ee/homeiswheretheheart...
Instagram
/ _homeiswheretheheartsare
TikTok
https://www.tiktok.com/@_homeiswheret...
Thank you @RYOBITOOLSUSA and MaxxAir fan!
0:00 Intro
0:47 Beginning of subfloor
1:24 Subfloor problem we encountered
4:07 Measuring for the vnose subfloor
5:11 Drilling in subfloor
5:31 Electrical explanation
6:35 Double furring strips
7:41 Cutting furring strips
9:10 Measuring for MaxxAir Fan
9:41 Building frame for the fan
11:12 Tracing frame to cut insulation
11:52 Drilling pilot holes for fan
12:20 Measuring on roof
14:16 First cut for the fan
15:40 Dry fitting fan
17:11 Installing the fan frame
18:21 Butyl tape on the fan (Don’t forget this!)
18:58 Drilling the fan into place
20:25 Lap sealant for fan
21:15 Testing the fan
22:12 Make shift ceiling stud
22:41 Ryobi time
25:13 Cutting our ceiling material
26:33 Installing our ceiling material
29:03 Shout out to our friend Nick and the universe
31:34 Finishing ceiling installation
34:24 Last pieces of ceiling installed
34:54 Outro
Items used in this episode
Underlayment (ceiling and walling material)
https://www.homedepot.com/p/TriPLYU...
Ryobi Oscilating Tool
https://www.homedepot.com/p/RYOBIONE...
Diablo Hole Saw (2 1/4 inch)
https://www.homedepot.com/p/DIABLO2...
MaxxAir MaxxFan
https://www.etrailer.com/RVVentsand...