Welcome to my restoration channel! In this restoration video I purchased some old machines vises at scrap price. I bought 4 vises for around $30 USD. This vise is a “Brown 6 2”. It was in pretty rough shape. It was busted, cracked, and had a bunch of holes, besides all of the rust. I think this turned out to be a great vise restoration.

THE RESTORATION PROCESS
I dismantled the vise then used a parts washer to clean them up before sandblasting them. The screws where sanded to give them a brushed finish. The handle was straightened in a vise. The handle and threaded rod were hot blued. The brass threaded bushing was sandblasted then cleaned up with the file, sand paper, and scotch bright. The casted sliding part of the vise was cracked in multiple spots. I drilled a hole at the back of the crack to stop the crack from running. I then cut into the crack to make a groove to fill with weld. We filled the drilling holes with weld after heating the part up. After welding we put the parts in sandblasting media to slow down the cooling process to help prevent cracking. After the parts were welded, they were sanded, ground, filed. I filled some imperfections with JB Weld. I primed, painted, and clear coated. The finish is a nice metallic blue. I greased the table and sliding area.

This vise will be put to good use, and I think it turned out nice.

If you like what I do here, consider subscribing or leaving a like. It helps me out. If you have any questions, comments, or advice, please feel free to leave a comment in the section below the video. Thanks so much for the support. I appreciate your view.

Follow me on Facebook
https://www.facebook.com/profile.php?...

Follow me on Instagram
  / rebuiltandrestored  

Check out some of my other videos:
Snapon Jack Restoration.    • Leaky Rusted Vintage Floor Jack Resto...  
1900s Grease Gun Restoration.    • 1900s Grease Gun Restoration  
Ingersoll Rand Impact Restoration.    • Restoration of a 1 Dollar Air Impact ...  
Milwaukee M12 Impact Restoration.   • Milwaukee M12 with Bad Motor Restorat...  
Craftsman Bench Grinder Restoration.    • Awesome Restoration of Rusted Grinder  
Snapon Ratchet Restoration.    • Mirror Finish. Rusty Snapon Ratchet ...  


Have a blessed day!
Kev

Products used or simular in video:
Mini Lathe Chuck Set.https://amzn.to/40m311p
PB Blaster. https://amzn.to/3Fyp4bs
Makita 18v Light. https://amzn.to/3laSKoz
Irwin Vise Grip Channel lock Pliers. https://amzn.to/44Jgku1
Irwin Vise Grip Needle Nose Pliers. https://amzn.to/3DAfIv0

Camera and filming gear;

Main Camera. https://amzn.to/428GF3Y
Video Camera. https://amzn.to/3JD7J41
Main len. shttps://amzn.to/3JDIL4F
50mm Lenshttps://amzn.to/3mUZZBt

Disclaimer. All links above are affiliate links. I make a small commission if links are used.

#restoration
#restore
#tool restoration
#vintage restoration