As an amateur hobbyist boat builder, I decided to replicate the Ferrari's designer Frank Stephenson's custom made Slipper launch electric boat.

I used designs from Dan Lee : @DanLeeBoatbuilding the plans are drawn by naval architect Michel Berryer which in my opinion way superior to GlenL's blueprints. Modern boat building is evolving and being able to navigate a 3D modeled blueprint with optional CNC cut components is the future of the wooden boat building.

I apologize for the mistakes that you may have noticed. I didn't even held a hammer before 2020 :) and boat building is an unending learning process.

My friend Bob is also working on one of Dan's designs Temptress. You may follow him on@Polymerman

Stay tuned for the part2.

00:00 CNC cutting mahogany pieces for frames
00:40 CNC cutting the construction board
01:25 Dry fitting the frames on construction board
02:10 Epoxying the frame parts.
03:03 How to clean a super dusty workshop
03:16 Building the strong back (base to build the boat on)
04:05 Planing (Thinning to size) the wood stock for stem (forward part of a boat).
04:24 Steambending the laminated stem pieces.
05:24 Removing extras from the stem with CNC
05:44 Cutting transom template from plywood
06:19 Epoxying the transom in to template
07:03 Laminating the stringers
07:24 Planing the stringer to size
07:41 Placing stringers through frames
07:55 Cutting notches on stringers to insert frames
08:55 Fixing transom to stringers
09:55 Shaping and beveling the stem
10:55 Building the keel
11:54 Steam bending chine (discarded later )
12:29 Shaping the stem
13:29 Setting up batten notches
13:58 Cutting batten notches
14:43 Beveling keel and stem
15:14 Installing laminated chine
15:56 Installing battens
17:21 Connecting sheer with transom
17:53 Epoxying keel to frames
18:24 Advanced keel fixation using angular momentum with potential energy derivered from the earths gravity.
18:38 End of part 1.