Making a masterpiece a big butcher's ax with your own hands is not difficult. This is a cool idea and today you will learn how to salt a drawing.
☑ Coral Disc http://ali.pub/50wszr
✂ stencil layouts A3 sheet in cdr format https://drive.google.com/file/d/12Gt5...
✅ How do I make $ 350 in 40 minutes a month    • ЗАРАБОТОК НА АЛИЭКСПРЕСС  ПАРТНЕРКА ...  
MY SITE / SCHEMES and more http://1000ss.ru/services/rukami/76b...
My VK group https://vk.com/diy1000
My Telegram channel https://t.me/diys1000
Many people think that it is difficult it is not. Having the necessary one ax can be made on a turnkey basis in 34 hours.
For polishing, you need an abrasive disc, flap disc, synthetic disc or as it is also called a coral disc. And a couple of sheets of sandpaper with grain 1000 and 2000. To make the ax mirrorlike, polish it on a felt wheel. For etching, we need a computer power supply, selfadhesive vinyl stencils and the most common salt. I've done metal pickling before subscribers should remember. But now I have a big butcher's ax. Several medium axes, one small ax And a kalun ax. Today we will etch the drawing with salt on all axes.
I removed heavy rust and old paint with a cleaning disc. In some places, the rust penetrated deep enough, so it had to be cleaned to bare metal. First, I cleaned the small axes and here he is
the butcher's great ax. It is almost three times the size of standard axes. We will also etch the drawing on it. The butcher's big ax took more time to clean up. The butcher's big ax was trying to align with emery wheels on an orbital machine. Emery wheels on clean and flat metal shrank quickly. And for me it was a discovery of a synthetic sweep disk, or as it is also called a coral disk. This is a great idea. Metal can be etched on polished coral discs. And it doesn't matter that there are irregularities on the plane. After metal etching, these defects are almost invisible.
Polished axes look impressive even without a pattern. To bring metal to a mirrorlike state.
Can be polished with 1000grit emery wheels, and polished with 2,000grit. The final polishing was done on a felt wheel with Zh3 automobile mastic. In just a few minutes, the axes are ready. And you must admit that polished axes look great. The big butcher's ax looks especially great.
How to salt a drawing? At the second stage, for etching the metal, you will need a computer power supply, salt at the rate of a kilogram per 4 liters of water. And stencils made on vinyl selfadhesive film. How to make stencils? I have prepared for you stencil layouts on an A3 sheet. What to do with a stencil layout? Throw it off on a flash drive and carry it to the nearest printing studio. Where ask to make a plotter cut on vinyl selfadhesive film. You can also buy installation film there,
How to transfer a stencil to metal? We take a stencil with text. And remove with a knife or needle all the selfadhesive film around the text and inside the letters. Only the text remains on the background. To transfer the sticker to the metal, we glue the mounting foil on the stencil, smooth it and carefully remove it. The stencil was transferred to the film.
Degrease the ax with solvent or alcohol, and try to glue the stencil the first time. Smooth it well and bend it strongly, slowly pull off the mounting tape. Plain leaflet or starshaped stickers can be glued without mounting foil. The main thing is not to touch the adhesive base with your hands.
Singlelayer etching will look good, but doublelayer etching creates the illusion of depth. This is done simply. First, we glue all the stencils that should shine. After that, we glue the stencils on top, which will seem to be in the background. It is very important to observe the temperature regime. The temperature of the solution should be the same as the temperature of the ax 2530 degrees. Find out the rest of the nuances in the video.
How to etch a drawing with salt with your own hands is described in detail in the video.
The butcher's great ax is ready as well as other axes. To make the drawing mirrorlike, polish it with a felt circle. It can even be dry, after felt the drawing will become more expressive and effective.
I like the result. If you like it too put your thumbs up. The axes turned out to be unique and very beautiful.
But they can rust, Therefore, we will make bluing of all axes in the most successful way.
As for bluing metal, I have no doubt that the coating will be wearresistant and moistureresistant. I'm more interested in how impressive the axes will look after bluing.
That's all dear friends. Now you know how to make the Big Ax of the Butcher beautiful and how to salt the drawing. The video was prepared for you by the author of the channel 1000 DIY's and Advice 1000 DIY and TIPS.