ISO1161 corner castings are the big threeholed blocks of corten steel which form the corners of all ISO shipping containers.

Cast from corten steel, usually in India or China and weighing 2.5 kg (23lb) they are the structural elements that are used to lift shipping containers as well as to connect them to whichever mode of transportation is being used to move the container such as ships, trains or road vehicles.

Corner castings are found on all eight corners of an ISO 6346 shipping container.

There are various other types of corner fitting often found on containerised units, which to the untrained eye may look the same or similar to an ISO container. Check the thickness of the steel at the stadium hole, if it is thin, anything less than about 18mm, then it is most likely not an ISO corner casting. If you are unsure or have any other questions, please feel free to contact us and send a photo of your container. https://dominoclamps.com/pages/contac...

To read the blog visit our website here: https://dominoclamps.com/blogs/info/a...

To buy Domino Clamps visit our website: https://dominoclamps.com/products/dom...

Subscribe to our channel here https://www.youtube.com/c/dominoclamp...

Edited by NE productions https://neproductions.co.uk/