To Purchase: https://bit.ly/3MuoDSN
Find in Catalog: https://bit.ly/428g7iZ
80/20 Website: https://bit.ly/3peM7n3

Hello and welcome to 80/20’s product highlight series. Today we are going to take a look at door track. This door track allows panels to be used as sliding doors, and can be cut to any length. They are easy to install, available in both fractional and metric, and are compatible across a wide range of profile series. Now the great thing about door track is that it requires no machining and no hardware.

Now the door track comes in two parts. You have your top portion, and you have your bottom portion. Now to ensure your panel slides smoothly, there is a little bit of a difference between these two. If you put them sidebyside, you can see that the bottom portion has a little bit of a bump at the bottom of the track. That’s going to allow it to slide smoothly.

Now when it comes to installing it, we’ll grab our frame, we’re going to start with the top portion. We’ll put it right into the open Tslot, and we’ll hammer it right in. Once we have that in there, we’ll flip our frame, and we’ll start in on our bottom portion. We’ll get it into the open Tslot and do the same thing, we’ll hammer it right in.

Now once you have all that in there, take your panel and put it into the top track first, and then into the bottom track, and then your panel can slide freely. Now hopefully you found this segment on door track helpful. For more information, please visit 8020.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.