This video does not cover changing the filter, but here is a link to a filter / gasket kit if that's the direction you want to go. In my opinion, if you change the fluid as recomended, you will not have to change the filter: https://amzn.to/48522VE

Fill plug: 24mm, 36lbfts
Drain plug: 10mm hex, 36lbfts
Level check tube: 6MM hex (hand tight only)
wheel lugs (76ftlbs)

Crush washers: https://amzn.to/3SLYC5V

Quinn 3/8" Drive Torque Wrench:
https://www.harborfreight.com/38ind...

Quinn 1/2" Drive Torque Wrench: https://www.harborfreight.com/12ind...

1 gallon of Valvoline Maxlife ATF (meets Toyota WS standard): https://amzn.to/3vL6isv
or
Toyota WS Fluid: https://amzn.to/46brxUA

Hand pump: https://amzn.to/3XDmUi4

These are both the same scanner:
Innova 5610: https://amzn.to/3ZFN3hc
Zurich ZR15s: https://www.harborfreight.com/zr15so...
Target temp: 95F113F (35C45C)

0:37 what vehicles does this apply to?
1:55 tools and supplies needed
1:57 the fluid I'm using
2:22 back to tools
3:17 removing the wheel
3:28 removing the plastic cover in the wheel well
3:50 loosening the fill plug
4:43 removing the drain lug, fill level tube and draining the fluid
6:39 reinstalling the fill level tube
7:23 refilling with 1 gallon of new fluid
8:22 reinstalling the fill plug (24mm, 36lbfts)
8:42 reinstalling the plastic cover
9:07 using the scanner to check temperature: 95F113F (35C45C)
9:54 reinstalling the wheel
10:11 with it running, draining the excess fluid
10:48 reinstalling the drain plug (36ftlbs)
11:05 torquing the wheel lugs (76ftlbs)

As an Amazon Associate, I earn from qualifying purchases. For your convenience, I try to post links to everything I use in the video description. That's part of how I cover the costs of this channel. I appreciate your support buy using these links!!